Starter Clutch cover removal?
So I'm suspecting this gasket set from Athena I bought is of very poor quality. I've had all my covers sweating oil which I'm fixing with some liquid gasket.
But I'm losing more oil than possible by just sweating alone and I have a puddle forming just behind the cylinders. I'm replacing all o-rings from the starter motor and the neutral sensor. However I suspect the gasket from the starter clutch cover is also leaking so I'd like to seal that off too with some liquid gasket since I just don't trust a gasket alone.
Is there a way to reach that without having to lower the engine from the frame? Seems like some bolts are right under the frame.