MTC Multi stage clutch

blah bla · 01-12-2009, 12:03 PM

trying to install this thing and i have two problems.....

1. instruction say i should have .100 - .125 clearance for the arms...i have .140

2. it came with a round machined piece, that i don't know where it goes...its round, about 2inches long and machined with 3 threaded holes on one side. looks like a bearing but i don't know where it goes.

any help is appreciated,

Phantom · 01-12-2009, 01:49 PM

.140 is fine. I had the same issue after speaking with the MTC rep, I was told that it's "OK".

Mine is set at .140 as well and I've had no issues with the clutch, even at 200+mph.

KZScott · 01-12-2009, 04:23 PM

You need to talk to NOX on Bikeland - News, reviews, and discussion on ZX14, ZX10R, other motorcycles

to adjust the clearance to where its supposed to be you need to adjust the stack height. play with thick and thin steels till you get it right. I have the 2 stage, so im not sure what piece you are talking about. there is a bearing in your cover right?

pictures would help

uffigang · 01-13-2009, 10:56 PM

Quote:

Originally Posted by blah bla

trying to install this thing and i have two problems.....

2. it came with a round machined piece, that i don't know where it goes...its round, about 2inches long and machined with 3 threaded holes on one side. looks like a bearing but i don't know where it goes.

any help is appreciated,

which bike ???

if its a zx12r ?

do you mean this part ?

uffigang
(woppi)

blah bla · 01-17-2009, 06:58 PM

thanks for all the help......it turns out i got an extra part, from some other bike included for free.

blah bla · 02-04-2009, 08:01 AM

thanks for the help guys.....first time out my little brother broke into the nines, gotta get a license now.



01-12-2009, 12:03 PM	#1
blah bla Member From: so-cal Joined: Oct 2004 Posts: 46	MTC Multi stage clutch trying to install this thing and i have two problems..... 1. instruction say i should have .100 - .125 clearance for the arms...i have .140 2. it came with a round machined piece, that i don't know where it goes...its round, about 2inches long and machined with 3 threaded holes on one side. looks like a bearing but i don't know where it goes. any help is appreciated,

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



01-12-2009, 01:49 PM	#2
Phantom Senior Member From: South Florida: Home of the 9/10th's Joined: Feb 2004 I Ride: 2003 Ace Performance Stage 2 R-Spec ZX-1287R I Race: Same as above Posts: 1,551	.140 is fine. I had the same issue after speaking with the MTC rep, I was told that it's "OK". Mine is set at .140 as well and I've had no issues with the clutch, even at 200+mph.



01-12-2009, 04:23 PM	#3
KZScott Senior Member From: New Brunswick, Canada Joined: Jan 2007 I Ride: hot chicks I Race: Nitrous Injected 01 ZX-13R Posts: 2,705	You need to talk to NOX on Bikeland - News, reviews, and discussion on ZX14, ZX10R, other motorcycles to adjust the clearance to where its supposed to be you need to adjust the stack height. play with thick and thin steels till you get it right. I have the 2 stage, so im not sure what piece you are talking about. there is a bearing in your cover right? pictures would help



01-17-2009, 06:58 PM	#5
blah bla Member From: so-cal Joined: Oct 2004 Posts: 46	thanks for all the help......it turns out i got an extra part, from some other bike included for free.



02-04-2009, 08:01 AM	#6
blah bla Member From: so-cal Joined: Oct 2004 Posts: 46	thanks for the help guys.....first time out my little brother broke into the nines, gotta get a license now.