nx kit question

Greenyzx12r · 06-04-2008, 03:22 PM

I have an nx wet kit installed on my 14r. I sprayed for the first time today on the dyno. 80 shot only delivered 20 hp? Have progressive controller with time delay and shower heads, foggers, etc. Any ideas would be helpful, thanks,Eric

Phantom · 06-05-2008, 12:35 PM

Need more info...

- What Progressive Controller are you using?

- What is the starting % and what is the ramp time?

- What jet #'s are you using?

- What was the A/F on the dyno?

- How much ignition was taken out?

- How much octane in the fuel?

- What was bottle pressure?

- Did you check for pinched or kinked lines?

It could be one or a few things going wrong here, answering these questions may help us help you troubleshoot this problem.

Greenyzx12r · 06-05-2008, 03:20 PM

Forgive me. I was being vague on issue. We have fixed the problem. We found out the bike was set up to do 30 shot only. We are leaning out some to achieve this. We are around 25 now. I am new to the nitrous thing as I am more into turbos. Thanks for replying.



06-04-2008, 03:22 PM	#1
Greenyzx12r Junior Member From: Des moines, Iowa Joined: Jul 2006 Posts: 5	nx kit question I have an nx wet kit installed on my 14r. I sprayed for the first time today on the dyno. 80 shot only delivered 20 hp? Have progressive controller with time delay and shower heads, foggers, etc. Any ideas would be helpful, thanks,Eric

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



06-05-2008, 12:35 PM	#2
Phantom Senior Member From: South Florida: Home of the 9/10th's Joined: Feb 2004 I Ride: 2003 Ace Performance Stage 2 R-Spec ZX-1287R I Race: Same as above Posts: 1,452	Need more info... - What Progressive Controller are you using? - What is the starting % and what is the ramp time? - What jet #'s are you using? - What was the A/F on the dyno? - How much ignition was taken out? - How much octane in the fuel? - What was bottle pressure? - Did you check for pinched or kinked lines? It could be one or a few things going wrong here, answering these questions may help us help you troubleshoot this problem.



06-05-2008, 03:20 PM	#3
Greenyzx12r Junior Member From: Des moines, Iowa Joined: Jul 2006 Posts: 5	Forgive me. I was being vague on issue. We have fixed the problem. We found out the bike was set up to do 30 shot only. We are leaning out some to achieve this. We are around 25 now. I am new to the nitrous thing as I am more into turbos. Thanks for replying.