FS: Galfer braided lines.

chuck1 · 06-13-2009, 09:23 PM

I have a set of galfer double lines I no longer need. They are the dual lines to the calipers and have a black covering. Comes with the correct banjo bolts from galfer but you will need new crush washers. In very good condition. Fits 2000 to 2003. $50.00 shipped.

sm300z · 06-20-2009, 10:45 PM

just wondering if you have a pic? if you still have them

thanks

chuck1 · 06-20-2009, 11:36 PM

Still have em. No, never took any pics of them.

villajuan81 · 07-01-2009, 10:16 AM

i have a 2002 zx12r. you still have these? where could i get crush washers for them? what size would i need? are there different styles galfer makes for the braided lines?

chuck1 · 07-02-2009, 12:35 AM

I still have them.

Cycle brakes.com can supply the washers. I would say a local dealer but they have a different outside diameter than the stock ones. Inside is still 10mm. Should work. The ones that came with it are aluminum. I have seen alum. and copper ones.

villajuan81 · 07-02-2009, 09:13 AM

how old are they? and why did you take them out?
which model these lines are?

thanks

chuck1 · 07-02-2009, 10:34 PM

Lines are about 2 1/2 years old. Maybe 2500 miles on them. Not sure what you mean by which model but they are a single line to each caliper.

I took em off because they were too short to fit with the heli bars and ohlins fork set up.



06-13-2009, 09:23 PM	#1
chuck1 Senior Member From: whittier, commiefornia Joined: Jun 2003 I Ride: 02 ZX12, 04 ZRX1200 Posts: 982	Galfer braided lines. I have a set of galfer double lines I no longer need. They are the dual lines to the calipers and have a black covering. Comes with the correct banjo bolts from galfer but you will need new crush washers. In very good condition. Fits 2000 to 2003. $50.00 shipped.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



06-20-2009, 10:45 PM	#2
sm300z Junior Member From: NASHVILLE,TN Joined: Oct 2002 Posts: 12	just wondering if you have a pic? if you still have them thanks



06-20-2009, 11:36 PM	#3
chuck1 Senior Member From: whittier, commiefornia Joined: Jun 2003 I Ride: 02 ZX12, 04 ZRX1200 Posts: 982	Still have em. No, never took any pics of them.



07-01-2009, 10:16 AM	#4
villajuan81 Member From: Longview, Tx Joined: Apr 2009 Posts: 91	i have a 2002 zx12r. you still have these? where could i get crush washers for them? what size would i need? are there different styles galfer makes for the braided lines?



07-02-2009, 12:35 AM	#5
chuck1 Senior Member From: whittier, commiefornia Joined: Jun 2003 I Ride: 02 ZX12, 04 ZRX1200 Posts: 982	I still have them. Cycle brakes.com can supply the washers. I would say a local dealer but they have a different outside diameter than the stock ones. Inside is still 10mm. Should work. The ones that came with it are aluminum. I have seen alum. and copper ones.



07-02-2009, 09:13 AM	#6
villajuan81 Member From: Longview, Tx Joined: Apr 2009 Posts: 91	how old are they? and why did you take them out? which model these lines are? thanks



07-02-2009, 10:34 PM	#7
chuck1 Senior Member From: whittier, commiefornia Joined: Jun 2003 I Ride: 02 ZX12, 04 ZRX1200 Posts: 982	Lines are about 2 1/2 years old. Maybe 2500 miles on them. Not sure what you mean by which model but they are a single line to each caliper. I took em off because they were too short to fit with the heli bars and ohlins fork set up.