wanted zx12r aftermarket driver pegs

I don't have any to sell, but I do have a suggestion. If you'd like a little more leg room, get a set of XB1200 Buell footpegs and install them. You'll have to drill the holes out in the pegs a bit to make the pin fit, and a little bit of grinding to make them fit in the clevices (all easily done with a Dremel tool), but they are MUCH more comfortable, as they have an offset built into them that drops the overall foot position like an inch or so. Only cost around $20 or so for a set (brand new) and are very easy to install.

You'll give up a little bit of lean angle clearance, but the asphalt will feelers grind the feelers down just fine. Heheheheh. I don't have any chicken strips on either my front or rear tire, so the Buell pegs shouldn't really impact your lean angle much. The feelers will touch down sooner, but like I said, they will grind down easily enough.

You can do a search of older posts here on the subject, as this has been a pretty common/popular mod. in the past.