it had it's first honda polish "bath" and inspection of the season today. The inspector thought something was wrong with the rotors as they clanked/rattled as he rolled it around


and here's a closeup of how my carbon fiber sprocket cover turned out:
...

Back together and filthy. I had a terrible time today. I missed a little spilled brake fluid which ate into my gauge faces, my upper slipped and scratched both the front fender and itself, and I'm missing a fairing collar

Scott's damper installed

however I ran into the same binding issue that others have reported. I'm going to have to find some shims and get it just right

Front end assembled:


Samcos fully installed:

Now awaiting my carbon snorkel to arrive from Japan and for sufficient hubris to install the Scotts damper bracket.

Forgot the nice camera, so the dirty cell phone will have to do.
Forks installed, front wheel on the ground!

And you can see the Cox installed

Nissin #1 with fresh SS hardware and Ferodo CP211 pads. Nissin #2 is on the way...

Samcos almost completely...