4-7-09
Well I'm nearing the end now and I am very content. It was able to spend a few hours in saddle this afternoon and the bike feels great! I mounted the windscreen and CF inners this morning, however I hit a snag with the right side.
The top-most fairing screw on the lowers goes into an L bracket that acts to keep the cowl and lower together and to support the inner. Since the auctmart fairings don't have the provisions to hold the L bracket, I've decided to simple JB weld them to the bottom of the inners. It worked beautifully on the left side, however on the right my mounting location needs a little help. I'll play with it a little as the bad weather approaches.
I also added the new sprocket, nut, and washer today. Looks great.
I'm just waiting to hear back from my CF guy about wraping what's left of the cover or spending the time to sand it smooth and repaint.
I have a few other odds and ends in the works/shipping system like preload adjusters, Titax levers, new leathers, and possibly a ZX10r shock.
The top-most fairing screw on the lowers goes into an L bracket that acts to keep the cowl and lower together and to support the inner. Since the auctmart fairings don't have the provisions to hold the L bracket, I've decided to simple JB weld them to the bottom of the inners. It worked beautifully on the left side, however on the right my mounting location needs a little help. I'll play with it a little as the bad weather approaches.
I also added the new sprocket, nut, and washer today. Looks great.
I'm just waiting to hear back from my CF guy about wraping what's left of the cover or spending the time to sand it smooth and repaint.
I have a few other odds and ends in the works/shipping system like preload adjusters, Titax levers, new leathers, and possibly a ZX10r shock.
Total Comments 0
